Takardar ƙarfe mai galvanized, kauri 0.6 mm, faɗi 600–1500 mm, nauyin rufi 30–275 g/m2, matakan kayan DX51D+Z zuwa S350GD+Z, shaidar ISO/CE, marufin fitarwa na al'ada, ƙaramin odar da ake buƙata 10 tan na mitir. Ana samun su a tsayin gaba-ɗaya, tsayin kwance da tsayin da aka ƙayyade.
Takardar ƙarfe mai galvanized, kauri 0.6 mm, faɗi 600–1500 mm, nauyin rufi 30–275 g/m2, matakan kayan DX51D+Z zuwa S350GD+Z, shaidar ISO/CE, marufin fitarwa na al'ada, ƙaramin odar da ake buƙata 10 tan na mitir. Ana samun su a tsayin gaba-ɗaya, tsayin kwance da tsayin da aka ƙayyade.
Kauri mafi yawan amfani na zanen ƙarfe mai galvanized shine 0.6 mm. Ana samar da shi a matsayin zanen yanka ko kewayen ƙarfe bayan an yi masa hot-dip galvanizing a kan substrate da aka nannade a sanyi. Wannan kauri ya dace da lanƙwasa, huda da kuma ayyukan siffanta. Nauyin rufi yana tsakanin 30–275 g/m² don haka ya dace da amfani a cikin gida da waje. Fadin daga 600 zuwa 1,500 mm, ba a buƙatar daidaita ƙayyadaddun bayanai zuwa samfuran da aka saba.
Wannan sassauci ya isa ga faranti mai kaurin 0.6 mm kuma rufin galvanized yana karewa daga tsatsa. Nauyin rufi zaɓi ne: 30–275 g/m². Kuma bambanci ɗaya kawai tsakanin allunan cikin gida masu rahusa da tayal rufi da suka tsira shekaru da dama a ƙarƙashin yanayi. Zinc yana aiki a matsayin anoda na sadaukarwa (yana lalacewa da farko), yana kare ƙarfen da ke ƙasa. Hakanan yana karewa daga lalacewa kamar ƙananan raunuka, ƙuraje da yankan. Tsawon rayuwar aiki yawanci shekaru 10–25 ne, gwargwadon kaurin rufi da yanayin muhalli. Kayan sun bambanta daga DX51D mai sauƙin siffanta zuwa matakan ɗaukar nauyi na S350GD da S550GD. A kan layin galvanizing ɗaya akwai matakai masu kama da su kamar SPCC, SGCC, SGCD, Q235, da A653. Ana karɓar ka'idojin JIS, EN, GB, da ASTM ne bisa kowane aiki, ba akasin haka ba.
Wannan farantin ana iya sarrafa shi cikin sauƙi. A kauri na 0.6 mm, ya yi siriri sosai don a lanƙwasa shi da kuma fasa shi don fitar da sassa masu rikitarwa, amma ya yi kauri isasshe don kiyaye siffarsa daidaitacce. Saboda sauƙin lanƙwasa farantin, zurfin jan ba ya haifar da tsagewa a rufin ko a ƙarfen tushe. Aikin sarrafa shi ya ƙunshi yawanci yanke sanduna ko faranti zuwa tsayin da ake so. Ba a samun fantsi na rufin zinc a wuraren lanƙwasawa kuma ba a samun tsagewar gefuna yayin huda. Haka kuma, ana yawan yin walda, inda ake yarda da walda ta juriya da walda ta arc. Duk da haka, layuka kamar Z275 da aka walda suna haifar da hayaki mai yawa wanda dole ne a fitar da shi tun farko. Idan kuna gudanar da masana'anta da wannan ma'auni, komai ya ta'allaka ne ga abu ɗaya: dole ne kowace tarin samfur ta kasance mai daidaito. Wannan ya fi amfani fiye da kallon takardar bayanai, musamman idan kuna shirya rahotannin aiki.
Fa'ida mafi bayyana ita ce ingancin saman wannan katin lantarki. Katin yana da lebur kuma mai santsi, kuma za ka iya zaɓar tsantsa, ƙanana mai dorewa, babba ko Zinc Spangle. Aiwatarwa ita ce hukuncin ƙarshe na ado, ba akasin haka ba. An fenti layin zinc kuma an haɗa shi kai tsaye da ƙarfe. Maganin saman ya ƙunshi passivation yayin fenti a shagon fenti, shafa mai yayin ajiya, da kariya daga tabon yatsu yayin ƙera akwati. Ana iya yin fenti da bugu kafin jigilar kaya, don haka allo yana isa a matsayin samfurin ƙarshe, ba a matsayin albarkatun ƙasa ba. Hakanan yana da tattalin arziki. Yafi ƙarfe mara tsatsa arha, yana da juriya ga tsatsa fiye da yadda aka saba ga faranti na gargajiya, kuma ana iya sake sarrafa shi gaba ɗaya ko da an zubar da shi. Farashi, kariya, bayyanar gani da duk buƙatun gabaɗaya na aikin an cika su.
| Faranti na ƙarfe mai rufin zinc 0.6 mm, Sunan samfur. | |
| Kauri. | . 6 mm. |
| Faɗi | 600-1,500 mm. |
| Tsayi | 2,000 mm, 2,440 mm, 3,000 mm, 6,000 mm, an yanke zuwa tsayi da aka kayyade |
| Nauyin rufi | 30–275 g/m2 |
| Kayan aiki | DX51D, DX52D, DX53D, S350GD, S550GD, SPCC, SGCC, SGCD, Q235, A653. |
| Ka'idoji | JIS, EN, GB, ASTM |
| Zinc mai kyalli | Babu Kyalli Kyalli Mai Ƙarami Kyalli Mai Ƙarfi Kyalli Mai Nauyi |
| Gyaran saman | Shafa mai, Rage tasirin yatsu, Hana barin alamar yatsu, Feshin fenti, Buga |
| Hidimomin sarrafa kayan inji | Yanka, Daidaita, Karkata, Huda, Matsawa. |
| Adadin odar mafi ƙanƙanci | Tani goma na mitir. |
| Marufi | Marufin fitarwa na al'ada ko kamar yadda abokin ciniki ya nema. |
An yi amfani da farantin bakin ƙarfe mai galvanized mai kauri 0.6 mm a aikace-aikace da ke buƙatar kariya daga tsatsa da sauƙin siffanta. Tsarukan ƙira na yau da kullum don sassan ciki ko na rufi kamar kabad, akwatunan na'ura, da akwatuna. Rigar zinc tana ba da kariya daga karce yayin yankan. An daidaita riga da yanayin muhalli. Ana fuskantar yanayin muhalli mai tsanani na sassan ciki (Z60–Z120), allunan rufi da bango, da sassan waje-kaɗan (Z150–Z180, Z275). Aji na ƙarfe yana bambanta gwargwadon nauyi. Sassan da aka yi wa siffa: DX51D. Sassan ɗaukar nauyi: S350GD. `Aji yana sarrafa nauyi, rufi yana sarrafa yanayi.
Wannan muhimmin ma'auni ne ga masu saye da yawa su zaɓa kafin su yi oda.
Na'urar sarrafa faranti ta cika dukkan ayyuka: yanka, gyara gefen, daidaita, lankwasa, huda rami da matsawa faranti. Ta amfani da wannan farantin ƙarfe mai kauri 0.6 mm, za ku iya yin katin corrugated, katin da aka yi masa ramuka, da allunan masu tsari, duk an haɗa su zuwa samfurin ƙarshe ba tare da ƙarin yankan ba, gwargwadon bukatunku. Ku ba mu sassan da kuke so da yadda kuke son a sarrafa su. Za mu gina allunan don haɗawa cikin layin samarwar ku na yanzu.
Ana shirya jigilar fitarwa cikin marufin jigilar ruwa na al'ada. Ana nade faranti cikin takarda mai hana ruwa, ana ƙarfafa su a kan firam na katako da sandunan ƙarfe, sannan a ɗora su cikin kwantena. Wannan ƙarfafawa na nufin ana iya jera su da tsara su yadda ya dace, yana rage sarari kuma yana sauƙaƙa lissafin kuɗin jigilar kaya. Idan kuna da wasu bukatun marufi, misali fim ɗin hana tsatsa, girman maballan ɗaurewa daban-daban ko marufi mai buɗe sama, da fatan za ku bayyana hakan lokacin yin oda domin mu iya biyan bukatunku cikin sauƙi.
Kuna neman wasu zaɓuɓɓukan ƙarfe mai galvanized da za su yi daidai da wannan farantin galvanized mai kaurin 0.6 mm? Waɗannan kayayyakin BOMIS Steel suna rufe ma'auni masu haske da masu nauyi, coils, da kammalallen spangle don irin wannan aikin:
A: DX51D shine matakin da aka fi amfani da shi. Don aikace-aikacen ɗaukar nauyi, don Allah a yi amfani da S350GD ko S550GD. Hakanan akwai matakai makamantan su kamar SPCC, SGCC, Q235 da A653. Duk ka'idojin JIS, EN, GB da ASTM an cika su.
A: Yi la'akari da yanayin muhalli. Z60–Z120 Sassan murfin kayan aiki na cikin gida Z150–Z180 Allunan rufi da bango tare da tsarin iska mai bututu Z275 Yankunan bakin teku ko muhallai masu tsauri Tunda ba za mu iya ba ku sanarwar matsayin aiwatarwa ba, za mu yanke shawara a madadinku.
A: Eh. Tsayin zanen gado na al'ada: 2000, 2440, 3000, 6000 mm. Don Allah ku bayyana tsayin da kuke so tare da odarku. Za mu daidaita girman kafin girkawa.
A: Tani 10 na mitirik ga kowane girma. Idan ƙasa da haka, kudin jigilar kaya da sarrafawa suna cinye fa'idar farashi. Ana iya jigilar wannan adadin bisa jadawalin jigilar kaya na al'ada kuma lokutan isarwa na yau da kullum ne.
A: Yana da nauyin kusan 4.71 kg a kowace murabba'in mita. Idan ka ƙididdige shi a matsayin 0.6 × 7.85, rufin galvanized ya yi ƙasa da 0.3 kg/m². Kimanin nauyin faranti mai girman 1.2 m × 2.44 m shi ne 13.8 kg.
A: An warware wayar galvanized, don haka ita ce samfurin ƙarshe. Ana yanke faranti daga kwayar bakin ƙarfe. Wani mataki a cikin tsarin, wanda ke ƙara wa faranti farashi, shi ne yankan su da sauke su. Kwayar bakin ƙarfe tafi arha.
A: A masana'anta muna auna kaurin rufin zinc, muna yin gwajin feshin gishiri, muna duba ƙarfin jan waya, muna tabbatar da girma da kuma duba kammala saman. Hakanan za ku iya sanya hannu kan kwangiloli da kamfanonin bincike na ɓangare na uku.
A: kwanaki 7 na kasuwanci. Farashin zinc na fuskantar sauye-sauyen kasuwa kuma farashin da aka bayar na iya tsofaffi cikin sauri. Kana buƙatar kwatanta farashi don dogon lokaci. Duk da haka, ka lura cewa za ka buƙaci sabunta farashin idan ya ƙare.
