5/5 – 1 मतदान करें

Special Offer PPGI PPGL 0.47*1220m PPGI

Coils Galvanized Steel Coil Az150 Z100 Z40 Ral9002 PPGI Color Coated Steel

PPGI coil in a requested 0.47 mm × 1220 mm format with RAL 9002 colour. Confirm galvanized or galvalume substrate, Z40, Z100 or AZ150 coating, paint system, forming route, coil dimensions and quantity per order.

Special offer PPGI/PPGL coil in a nominal 0.47 mm × 1220 mm format for roofing, wall cladding and other building-material applications. The requested finish is RAL 9002, with galvanized or galvalume substrate and Z40, Z100 or AZ150 coating options to be confirmed against the order specification.

विशेषताएँ

This PPGI/PPGL coil combines a coated steel substrate with a painted surface for appearance and forming use. RAL 9002 gives the project a light neutral colour, while the coating system, paint family, gloss and back-coat requirements need approval before production. Check the visible colour against an agreed sample or RAL reference. A physical sample also helps compare gloss and surface appearance.

PPGI PPGL galvanized and galvalume coating structure with RAL 9002 painted surface

The 0.47 mm × 1220 mm request gives the mill a clear starting point for quotation. Galvanized PPGI and galvalume PPGL are not interchangeable: the buyer should confirm the substrate, coating mass, steel grade, temper, paint system and intended forming route. Z40, Z100 and AZ150 are order options, not one combined coating value. The selected option should appear on the quotation and order confirmation.

विशेष विवरण

उत्पाद Prepainted galvanized or galvalume steel coil
Requested thickness 0.47 mm, confirm per order
Requested width 1220 mm, confirm per order
Colour RAL 9002, confirm by approved sample
Coating options Z40, Z100 or AZ150, select and confirm per order
Steel grade Confirm according to forming and structural requirements
Paint system Confirm resin, coating thickness, gloss and back coat
Coil ID, OD and weight Confirm per line and shipment plan

आवेदन

Buyers can evaluate this coil for building-material components where a light painted surface and a defined strip width are required. Final suitability depends on the substrate, coating mass, paint system, bend radius and exposure conditions. The project team should match the selected coil to the profile drawing before approving a production schedule. RAL 9002 can support a light neutral appearance, but the approved sample remains the colour reference.

  • Roofing and wall cladding
  • Ceiling and partition panels
  • Roll-formed building profiles
  • Doors, enclosures and fabricated panels
  • Interior and exterior construction components

RAL 9002 PPGI PPGL coil building material applications

प्रसंस्करण

Confirm whether the coil will be slit, cut to length or roll formed. The order record should state the visible face, feed direction, bend sequence, minimum inside radius and protective-film requirement. The buyer should also confirm flatness and edge expectations before the coil enters a forming line. For galvanized substrate projects, buyers may compare this brief with High UV Resistant PPGI Coil when selecting a paint system for outdoor exposure.

पैकेजिंग

Confirm eye-to-side or eye-to-sky packing, coil weight, seaworthy protection, marking and loading instructions before shipment. Packing details should match the final coil dimensions and handling equipment at destination. Confirm moisture protection and edge protection for the intended transport route, and keep the approved packing description with the order documents.

अक्सर पूछे जाने वाले प्रश्न

Is this PPGI or PPGL coil?

The title covers both options. Confirm whether the order requires galvanized PPGI or galvalume PPGL substrate before quotation.

Does 0.47 mm × 1220 mm describe the final size?

It is the requested starting size. Confirm thickness and width tolerance, measured thickness basis and final dimensions per order.

What does RAL 9002 mean?

RAL 9002 is the requested colour reference. Approve a physical sample because lighting, gloss and monitor settings change the visual result.

Can I choose Z40, Z100 or AZ150?

Separate these options by substrate and coating mass. Select one requirement after reviewing exposure, forming and corrosion conditions.

Which paint system should I use?

Choose resin and coating thickness from the service environment and forming route. Confirm PE, SMP, HDP or PVDF after requirements are defined.

Can the coil be roll formed?

Evaluate roll forming after the grade, temper, coating system, bend radius and tooling route are confirmed.

What information should I send for a quotation?

Send substrate, grade, thickness, width, coating mass, colour, paint system, coil dimensions, quantity, packing and destination.