A matsayin babban masana'anta mai ƙwarewa a ƙarfen PPGL (galvalume da aka riga aka yi masa fenti), Bomis Steel na da ingantattun wuraren sarrafawa don samar da cikakkun mafita na ƙarfe daga farko har ƙarshe.
Baya ga samar da kwayoyin bakin ƙarfe na PPGL masu inganci, ƙarfin samarwarmu mai ƙarfi yana ba mu damar yanke da tsara kayan daidai gwargwado zuwa sandunan bakin ƙarfe na PPGL, faranti lebur, da farantin rufi masu lanƙwasa don dacewa da takamaiman buƙatun aikin ku.
Muhimman Takamaiman Bayanan Fasali:
Kauri: 0.12 mm – 1.5 mm
Tsayi: Ana iya keɓance shi gaba ɗaya bisa ga buƙatunku
Matakan Karfe: DX51D+AZ, DX52D+AZ, DX53D+AZ, S220GD+AZ, S350GD+AZ, S550GD+AZ, CGCC-AZ, CS-B, da sauransu.
Faifan Karfe na PPGL da aka yanke daidai
An ƙera sandunan bakin ƙarfe na PPGL (Pre-painted Galvalume) don sauƙaƙe tsarin samarwarku. A Bomis Steel, muna amfani da injinan yankan sirara na zamani don yanka daidai kwayoyin PPGL masu inganci zuwa faɗi na musamman da suka dace da takamaiman buƙatunku. Wannan tsari mai tsanaki yana tabbatar da cewa sandunanmu sun shirya sosai don aikace-aikacen sarrafa zurfi, yana ba ku damar yin stamping, lankwasawa, da walda cikin inganci da daidaito mafi girma.
Dukkan sandunan PPGL ɗinmu an yanke su ne daga kayan inganci. ƙwayoyin galvalume tare da rufin haɗin aluminium-zinc 55%, wanda ke ba ku tushe da ya fi ƙarfin bakin ƙarfe na gargajiya da aka galvanize wajen juriya ga tsatsa a gefuna da kuma mayar da zafi.
| Fasaloli / Takamaiman bayanai | Cikakkun bayanai |
| Sunan Samfur | Premium PPGL Karfe Cire |
| Kauri | 0.12 mm – 1.5 mm |
| Faɗi | 300 mm – 914 mm (Faɗi na al'ada da ake da su, ana iya keɓance su gaba ɗaya gwargwadon buƙatunku) |
| Tsayi | Yankan daidai zuwa tsayi bisa ga bukatu |
| Rufin Mass (AZ) | AZ30 – AZ150 (g/m²) |
| Bazara ta Asali | Galvalume (GL) Zoben Karfe |
| Nau'ikan Karfe | DX51D-DX53D, S220GD-S550GD (tare da +AZ), CGCC-AZ, CS-B, da sauransu. |
| Tsarin fenti | PE, SMP, HDP, PVDF |
| Zaɓuɓɓukan Launuka | Cikakken jadawalin launuka na RAL da daidaita launuka na musamman |
| Ka'idodin Bin Dokoki | ASTM, EN, JIS, GB, DIN |
| Diamita na ciki na coil (ID) | 508 mm (20″) ko 610 mm (24″) |
| Nauyin zobe | Ana iya keɓance shi gaba ɗaya bisa ga buƙatar abokin ciniki |
| Ƙaramin odar da ake buƙata (MOQ) | Tani 18 na mitir |
| Marufi | Marufin fitarwa na ƙima mai ƙarfi don jigilar ruwa (fim ɗin filastik, takarda mai hana danshi, da murfin ƙarfe) |
Injiniki Mai Ci Gaba: A Cikin Faifan Karfe na PPGL ɗinmu
Asalin GalvalumeAn ƙera shi don kariya biyu
A tsakiyar sandunan bakin ƙarfe na PPGL ɗinmu akwai inganci na musamman. ƙwallo na Galvalume (GL) da aka tsoma a cikin zafi. Substrat ɗinmu yana da rufin haɗin ƙarfe da aka inganta sosai wanda ya ƙunshi 55% aluminium, 43.4% zinc, da 1.6% silicon. Wannan daidaitaccen haɗin sinadarai yana samar da ingantaccen tsarin kariya biyu: aluminium yana samar da katanga mai ƙarfi da ba ruwa ko sinadari ke iya wucewa ba, yayin da zinc ke aiki a matsayin anoda mai sadaukarwa. Tare, suna tabbatar da juriya ga tsatsa mai ban mamaki da ɗorewa ga kayayyakin ƙarshe.
Tsarin rufi na matakai da yawa na musamman
An gina ɗorewa a kowane mataki. Muna amfani da ingantaccen tsarin kera na “Two-Coat, Two-Bake”, inda muke shafa primer da topcoat a hankali sannan mu busar da su a duka bangarorin ƙarfe. Wannan yana tabbatar da kyakkyawar mannewar fenti, riƙe launuka masu haske, da ƙarfin jure yanayi.
Aiki mara misaltuwa da sassauci: Bomis PPGL Nau'in Karfe
An ƙera su don cikakken kwarewa, kwayoyin bakin ƙarfe na PPGL ɗinmu suna ba da daidaitaccen haɗin ƙarfin gine-gine da kyakkyawan kamanni. Suna ba da juriya ta musamman ga tsatsa, ƙarin mayar da zafi, da kuma sauƙin siffa mai ban mamaki don sarrafa zurfi, wanda hakan ke sanya su zama zaɓin kayan aiki mafi dacewa a masana'antu daban-daban.
Bincika manyan aikace-aikace:
Gini da Gina
Amfani: purlin na tsari, sassan ƙarfe masu siffar C/Z, ƙofofin lanƙwasawa masu nauyi da ƙofofin gareji, maballan ɗora na photovoltaic (PV), da bututun iska na masana'antu/bututun lanƙwashe.
Amfanin: Yana ba da ƙarfi mai ƙarfi da juriya ga yanayi don samar da ababen more rayuwa masu ɗorewa.
Kera na'urorin gida
Amfani: murfin na'urar sanyaya iska ta waje (fannoni na gefe/na sama, tushe), sassan firiji (fannoni na gefe/na baya, ƙirar firam ɗin ƙofa), murfin injin wanki, da murfin na'urar dumama ruwa.
Amfanin: Yana ba da juriya ga zafi mai yawa da ƙarewa mai ƙyalli na ado wanda ke ɗaga darajar kayayyakin masu amfani.
Ajiya da Kayan Aiki na Kasuwanci
Amfani: Rafukan nunawa a kasuwanni, sandunan ajiya masu ɗaukar nauyi a ma'ajiyai, kabad na kayan aikin masana'antu, da kabad na fayiloli masu tsaro.
Amfanin: Yana haɗa kyakkyawan sassaucin siffa da saman mai ɗorewa don jure lalacewar yau da kullum a wuraren da ake yawan zirga-zirga.
Tambaya ta 1: Menene bambanci tsakanin kwayar PPGL da sandar PPGL?
A:Kwandon PPGL shi ne asalin, babban nade na ƙarfe Galvalume da aka riga aka yi masa fenti (yawanci faɗinsa daga 1000mm zuwa 1250mm). Ana ƙirƙirar sandar PPGL ta hanyar ɗaukar wannan babbar kwayar baƙin ƙarfe mai faɗi sannan a yi amfani da injin yanka mai daidaito don yanke ta zuwa faɗi-faɗi kaɗan (misali 300mm, 500mm, da sauransu). An tsara sandunan ne don a tura su kai tsaye cikin layukan kera na musamman, wanda ke sa su shirya don ƙarin sarrafawa mai zurfi kamar latsawa, lankwasawa, da siffar waƙa ta musamman.
Tambaya ta biyu: Wadanne faɗi da kauri Bomis Steel zai iya keɓancewa don sandunan PPGL?
A: Muna ba da sabis na yankan al'ada mai matuƙar sassauci. Za mu iya sarrafa sandunan PPGL masu kauri daga 0.12 mm zuwa 1.5 mm. Don faɗi, za mu iya yanke kayan zuwa kowane girma tsakanin 300 mm da 914 mm, ko ma ƙananan fiye gwargwadon takamaiman buƙatun samarwarku. Kawai ku sanar da mu daidai girman da kuke buƙata!
Q3: Shin gefunan yankan faifan PPGL za su yi tsatsa?
A: Wannan wata damuwa ce da aka saba yi, amma tushen Galvalume (Aluzinc) yana ba da kariya mai kyau sosai. Rufin aluminium-zinc na 55% yana da kaddarar “anodic na sadaukarwa”. Wannan na nufin rufin yana aiki wajen kare bakin ƙarfe da ke bayyane a gefunan yankan daga saurin yin tsatsa. Duk da haka, don tsawon rai mafi girma, muna ba da shawarar adana sandunan a wuri mai bushewa da kuma gujewa tsawon lokacin fallasa su ga ruwa mai tsayawa kafin aikin ƙarshe.
Q4: Shin zan iya zaɓar launuka na musamman da tsarin fenti don sanduna na?
A: Tabbas. Za mu iya daidaita kowace launi a cikin ma'aunin. Jadawalin launuka na RAL, kuma muna ba da daidaita launi na musamman bisa ga samfuran ku na zahiri. Dangane da buƙatun juriya ga yanayi na aikin ku, za ku iya zaɓar daga cikin tsarin fenti na musamman daban-daban, ciki har da PE (Polyester), SMP (Silicone Modified Polyester), HDP (High Durability Polyester), da PVDF (Fluorocarbon).
