Wholesale Galvalume Steel Sheet in Coil

Kelib chiqish joyi:Shandong, Xitoy

Yetkazib berish vaqti: 20 kun

Ta'minlash qobiliyati: Oyiga 5000 tonna

rangBiz rangni sizning namunangiz va RAL ranglar jadvali asosida moslashtira olamiz.

Eng kam buyurtma miqdori: 18 tonna

Turli minimal buyurtma miqdorlari mahsulot narxlarining turlicha bo'lishiga olib keladi.

Agar sizga kerak bo'lsa, iltimos, imkon qadar tezroq mijozlarga xizmat ko'rsatish bo'limimizga murojaat qiling.

Mahsulot nomi
Galvalyum po'lat rulon
Kengligi
600mm-1250mm
AZ  Coating
30-200g/m2
Size Tolerance
±1% ±3% ±5% ±7%
Certificate
MTC,ISO9001,SGS
Yetkazib berish vaqti
20 kun

AZ Galvalume Steel Coil Classification

  • Material quyidagi bir nechta variantlarda mavjud:
  • Tijorat po'lat (CS A, B va C turlari),
  • Po'latdan yasalgan shakllantiruvchi (FS A va B turlari),
  • Chuqur tortish po'lati (DDS),
  • Extra deep drawing steel (EDDS),
  • Structural steel (SS),
  • High strength low alloy steel (HSLAS Type A), and
  • High strength low alloy steel (HSLAS Type B).

Galvalume Steel’s surface treatment

Chromate passivation
A surface treatment method used after aluminum-zinc alloy coating high-strength steel sheets to reduce white rust during transportation and storage
Chromium-free passivation
It requires the restriction of the use of surface treatments in passivation liquids that are harmful to the environment and human body, such as hexavalent chromium
resistant
The surface treatment method after the passivation process acts as a lubricant during processing, preventing fingerprints from staining the surface during operation and preventing premature blackening of the surface during use
Fingerprint-resistant without chrome
Limits the content of environmentally and human-harmful hexavalent chromium in fingerprint-resistant liquids
Oil
 Surface treatment methods that reduce corrosion during long-distance transportation and long-term storage

 AZ Galvalume Steel Coil Application Scensrios

Outdoor Atmospheric Environment
Its corrosion resistance is approximately three times that of ordinary galvanized steel coils, making it suitable for most outdoor natural environments, including typical atmospheric environments in temperate and subtropical regions, as well as environments with light industrial dust and small amounts of airborne particles, such as buildings along city streets and the 2B Finish Stainless Steel

exterior walls/roofs of factories in suburban areas.
It also has good resistance in coastal areas with certain humidity (areas not directly exposed to high salt spray), as the coating can slow down the corrosion of steel by salt.

Mildly Corrosive Industrial Environments
Suitable for light industrial areas with small amounts of corrosive gases, such as the internal or external structures of electronic assembly and food processing plants. The concentration of corrosive substances in these environments is low and will not rapidly damage the aluminum-zinc coating structure.

Temporary Environments Requiring Short-Term Weather Resistance
It can be used for the enclosure structures of temporary buildings, such as temporary prefabricated houses on construction sites and temporary storage enclosures. The service life of these environments is generally 3-5 years, and its coating can provide sufficient protection to prevent rapid rusting of the steel.

Mahsulot namoyishi

EN 10346 AS350GD AZ Galvalume po'lat rulonEN 10346 AS350GD AZ Galvalume po'lat rulon

Ko'p beriladigan savollar

 

1.what is the difference between galvalume and galvanized steel

The core difference between aluminum-zinc coated steel sheets and galvanized steel sheets lies in the composition, structure, and performance of the coating. The former has an alloy coating of 55% aluminum + 43.4% zinc + 1.6% silicon, offering both barrier protection and sacrificial protection, with superior corrosion resistance, heat resistance, and reflectivity; the latter has a pure zinc coating, primarily providing sacrificial anode protection, and is lower in cost and easier to paint, making it suitable for general anti-corrosion applications.

2. Siz ishlab chiqaruvchimisiz yoki savdo kompaniyasimisiz?

Biz savdo bo'yicha 10 yildan ortiq tajribaga ega fabrikamiz.

3. Sifatni qanday kafolatlaysiz?

1) Faqat eng yuqori darajadagi, sertifikatlangan zavodlardan ta'minlash.

2) O'zimizning qat'iy ichki sifat nazorati tekshiruvlarini o'tkazish.

3) Har bir jo'natma uchun rasmiy Mill Test sertifikati va sifat kafolatimizni taqdim etish.

Sertifikatlash

sertifikatlash-miqyosi