RAL 3020 Red PPGI Corrugated Roofing Sheet gives a project a defined red finish while keeping the order specification tied to a galvanized steel substrate, paint system and formed profile. BOMIS can review the requested colour, dimensions, coating route and delivery format before production. The final grade, thickness, width, coating mass and profile remain confirm per order.

RAL 3020 is a strong traffic-red colour reference, but colour approval still matters. Keep the approved sample with the order so production and replacement panels follow the same visual target. The corrugated profile adds section geometry for roofing use; crest, valley, overlap and cut length must match the roof design rather than a generic catalogue line.
PPGI starts with galvanized steel and adds a primer and finish-coat system selected for the exposure, forming route and appearance required. PE, SMP, HDP or PVDF may be considered where available, with the exact system, top-coat thickness and reverse-side treatment confirmed per order. The quotation can cover coil supply or formed roofing sheet, but it should state which format is being priced. That distinction keeps the material schedule and installation scope clear.
| Item | Project confirmation |
|---|---|
| Produk | RAL 3020 red PPGI corrugated roofing sheet or parent coil |
| Substrat | Galvanized steel; grade and coating designation confirm per order |
| Warna | RAL 3020 red, subject to colour approval |
| Ketebalan | Confirm per order against the forming route |
| Width and length | Confirm coil width, effective cover width and cut length per order |
| Sistem cat | PE, SMP, HDP, PVDF or another agreed system, subject to availability and exposure |
| Permohonan | Roofing, wall cladding and related building-envelope work |
| Quantity and packing | Confirm order quantity, seaworthy packing and destination requirements |
Use the red PPGI route when the roof or wall package needs a consistent colour reference and a formed steel profile. Send the roof drawing before the quotation is final. This step keeps the red finish and panel geometry aligned from quotation to installation. It also gives the supplier one reference for colour approval and panel quantity.
Confirm whether BOMIS is supplying parent coil or finished corrugated sheet. For coil supply, record the forming direction, effective cover width, profile, cut length and edge requirements. For finished sheet, confirm panel geometry, overlap, hole positions and packing. Check the paint system against forming conditions before release. Record the approved colour beside the forming schedule so the visible face and formed edges follow one instruction.

Packaging should protect the painted surface and panel edges during handling and ocean transport. Confirm orientation, moisture protection, lifting points, marking, bundle limits and destination requirements. The final packing method remains confirm per order. Keep the approved colour and packing marks with the shipping record.
This page covers PPGI with a galvanized substrate. Request a separate PPGL quotation for an aluminium-zinc substrate.
Yes. Keep the approved colour reference with the order and confirm the paint system for exposure and forming.
Yes. State coil width, thickness, coating route, coil weight and forming requirements when the buyer will form panels locally.
Send the panel drawing. Confirm both coil width and effective cover width because overlap changes the installed coverage.
PE, SMP, HDP or PVDF may be considered. BOMIS should confirm the available system against the exposure and order.
Send colour, substrate, grade, thickness, format, dimensions, profile, quantity, packing and destination. Mark open fields confirm per order.




Otak keluli saya boleh membantu anda.