ASTM A755 G550 prepainted roofing sheet with an anti-capillary groove suits buyers who need a high-strength coated-steel roof profile with a controlled side-lap detail. Confirm the grade, finish, profile, groove, dimensions and coating system against the approved drawing before production begins.

G550 gives the order a clear strength reference for roofing applications, but the finished sheet still depends on thickness, profile geometry, forming direction and support spacing. Bomis can review the roof layout, required sheet length and forming details before confirming the quotation. This keeps the steel grade and the roll-forming plan aligned.
The anti-capillary groove is the key profile detail. At the side lap, the groove creates a defined contact arrangement between adjacent sheets and helps the buyer address water movement at the overlap during design review. The exact groove position, depth, width, lap direction and sealant requirement must follow the approved profile drawing; these values are not assumed from the product name.

The prepainted surface also needs an order-level decision. Confirm the metallic-coated substrate, paint family, top and back coating requirements, colour, gloss, protective film and exposure conditions. A colour sample and profile sample are useful before the production schedule is released.
| Item | Order reference |
|---|---|
| Produk | Prepainted roofing sheet with anti-capillary groove |
| Referenced standard | ASTM A755, confirm the applicable project specification |
| Steel grade | G550, confirm with the required forming and structural conditions |
| Profil | Roofing profile, select from the approved drawing |
| Anti-capillary groove | Required side-lap feature; geometry and tolerances confirm per order |
| Base metal thickness | Confirm per order |
| Effective width and length | Confirm from the roof layout and profile drawing |
| Substrate and coating | Confirm metallic coating, paint system and coating mass per order |
| Colour and gloss | Confirm by approved colour reference or sample |
| Pengubahsuaian | Available; details confirm before production |
Buyers can evaluate this sheet for industrial and commercial roofing where a prepainted finish, a G550 strength reference and a defined side-lap detail are required. The roof designer should check the span, support spacing, wind actions, drainage direction and fastening method before selecting the final profile. For a colour-coated coil comparison, see the CGCC RAL 5020 PPGI and PPGL roofing guide.

Confirm whether Bomis will supply formed sheets or coated coil for local roll forming. The order should state the profile drawing, sheet length, visible face, feed direction, lap direction, groove geometry, cut tolerance, hole requirements and protective-film need. G550 requires a forming plan that respects the specified profile and bend sequence. If the project uses a coil route, compare the paint-system requirements with the HDP-coated PPGI coil guide before approval.
Confirm sheet bundle size, protective wrapping, edge protection, lifting points, marks and seaworthy packing before dispatch. The final packing method should match the sheet length, bundle weight, loading equipment and transport route. Keep the approved profile, colour and packing descriptions with the order documents so receiving staff can check the shipment.
ASTM A755 is the referenced specification. Confirm the substrate, coating, paint system, profile and acceptance requirements for the project.
G550 is a strength reference, not a complete profile design. Select it with the thickness, forming route, support spacing and drawing.
It defines the side-lap detail. Groove geometry, sealant and fastening requirements must follow the approved drawing.
Yes. Use an approved colour reference or sample, and confirm the paint family and gloss before production.
Confirm the supply format with the quotation. Provide the profile, effective width, sheet length, quantity and tolerance.
Send the standard, G550 grade, thickness, profile drawing, groove detail, colour, quantity, packing and destination.
Confirm the coating system, edge treatment and maintenance requirements against the coastal or high-humidity exposure.
Otak keluli saya boleh membantu anda.