Bomis Steel na samar da zanen GI mai kauri 2mm (galvanized steel) — an nade shi a sanyi, ana iya tsara girman faɗi daga 100–1500mm da tsayi daga 2000–8000mm. Ana samun sa a nau'ikan santsi, lanƙwasasshe (corrugated), da mai zanen faffɗa (embossed). Kayan sun haɗa da DX51D-DX54D+Z, Q235+Z, SPCC/SGCC+Z. Rigar zinc 30-275g/m². An tabbatar da ISO 9001:2015. MOQ tan 10. Ya dace don rufi, rufin bango, masana'antar motoci, aikin gona, da na'urorin gida.
Takardar ƙarfe mai rufin galvanized mai kauri 2mm kayan aiki ne na al'ada a fannin gine-gine da masana'antu, tana haɗa ƙarfi da sauƙin sarrafawa. Kayan sun haɗa da takardu lebur, takardu masu lanƙwasa (corrugated) da takardu masu zanen (embossed). Ana iya daidaita girman su guda-guda gwargwadon buƙatun aikin, wanda hakan ya sa su dace da aikace-aikace kamar rufin gine-gine, bangon waje da kera motoci.
Jure tsatsa. Rufin galvanized mai nauyin rufi daga 30–275 g/m² yana ba da kariya mai inganci a yanayin waje. Don aikace-aikace da ke fuskantar tsawon lokaci a waje, misali a kan rufin gida da bangon waje, ana ba da shawarar zaɓar takardun GI Sheet.
Ƙarfin tsari. Tsarin nika mai sanyi yana tabbatar da dorewar kaddarorin injin na tushe. Takaddar 2mm tana cika buƙatun aikace-aikace da ke buƙatar ƙarfin ƙarfe mai yawa, kamar tallafin tsarin gine-gine da chassis na mota.
Dacewar sarrafawa. Kayan yana da sassauci mai kyau kuma ya dace da nau'ikan ayyukan sarrafawa na biyu irin su lankwasa, huda, siffantawa da walda. Muna sarrafa faranti na ƙarfe bisa ga buƙatun abokin ciniki zuwa faranti masu lanƙwasa, masu ramuka ko masu siffantawa, muna daidaita su da buƙatun aikin.
| Sunan Samfur | Takardar GI mai kauri 2mm |
| Kauri | millimita biyu |
| Faɗi | 100-1500mm |
| Tsayi | 2000-8000mm (za a iya keɓancewa) |
| Kayan aiki | DX51D-DX54D+Z, Q235+Z, SPCC/SGCC+Z, A653/A653M+AZ |
| Al'ada | GB, JIS, EN, ASTM |
| Nau'i | Faranti mai lebur, faranti mai lanƙwasa |
| Rufin zinc | 30-275g/m² |
| Spangle Type | Babu Kyalli / Karami / Na Al'ada / Babba Kyalli |
| Fasaha | An nade a sanyi |
| Adadin mafi ƙanƙanci na oda | ton goma |
Muna ba da hanyoyin sarrafa na biyu kamar matsawa (press forming), huda (punching), embossing, lankwasawa (bending) da walda (welding). Masana'antarmu tana da layuka biyu na samar da galvanizing, wanda ke ba mu damar sarrafa odar da ke da ƙayyadaddun bayanai daban-daban a lokaci guda da rage lokacin jiran sauyin aiki. Muna kera sassa na musamman bisa ga zanen abokan ciniki kuma muna mai da hankali kan daidaiton girman samfurin da aka kammala.
Marufin fitarwa na al'ada: igiyar karfe, astar mai hana ruwa, ya dace da sufuri na teku da sufuri mai nisa. Idan kuna da buƙatun marufi na musamman ko buƙatun lakabi, da fatan za ku sanar da mu lokacin yin oda. Za mu aiwatar da su bisa ga tsarin da aka yarda da shi.
Eh. Faɗi 100–1500 mm, tsawo 2000–8000 mm, ana yanke bisa odar yadda ake buƙata.
DX51D-DX54D+Z, Q235+Z, SPCC/SGCC+Z, A653/A653M+AZ da sauransu, zaɓi gwargwadon aikace-aikace.
30-275g/m², gwargwadon bukatun juriya ga lalacewa.
Babu ƙyalli, ƙyalli mafi ƙanƙanci, ƙyalli na yau da kullum da ƙyalli mai yawa suna samuwa.
MOQ na al'ada shi ne tan 10.
Saboda canje-canjen farashin albarkatun ƙasa da kasuwa, farashin daga masana'anta a China yana kusan USD 520–900 a kowace ton. Za a bayar da farashin ƙarshe bayan tabbatar da takamaiman bayanai.
Muna ba da matsawa, bugawa, sassaka, lankwasawa da walda. Hakanan muna sarrafa faranti masu lanƙwasa, faranti masu ramuka da faranti masu sassaka.
Masana'antarmu tana da takardar shaida ta ISO 9001:2015, kuma kayayyakinmu sun bi ka'idodin GB, JIS, EN da ASTM.
