DX51D galvanized steel coil for roll forming, roofing profiles and fabrication. Specify EN 10346 or ASTM A653, Z40–Z275 coating, thickness, width, surface treatment, coil weight, quantity and destination port for an order-based quotation.
DX51D+Z galvanized steel coil is a hot-dip galvanized flat steel product for roll forming, roofing profiles, construction components and fabrication. Bomis supplies the galvanized coil range for buyers who need a formable substrate with a defined zinc coating. Send the required thickness, width, coating class, quantity and destination port for an order-based quotation.
DX51D+Z is a practical grade for bending, roll forming and cut-to-length work. The final grade and mechanical requirements should match the drawing or production line. Bomis lists Z40 to Z275 coating classes for its galvanized coil range. Select the coating according to the service environment and corrosion target, then state the class and measurement basis in the quotation.
| Item | Available / confirmation basis |
|---|---|
| Product | DX51D+Z galvanized steel coil |
| Alternative designation | SGCC, subject to standard and mechanical confirmation |
| Standards | EN 10346 or ASTM A653, according to order requirement |
| روکش روی | Z40–Z275 range listed for the Bomis galvanized coil range; exact class to confirm |
| ضخامت | Confirm for the specific order |
| عرض | Confirm for the specific order |
| Surface | Oiled, chromated or other treatment to confirm |
| Spangle | Confirm required appearance |
| Coil weight | Confirm according to handling and loading requirements |
| پردازش | Full-width coil; slitting or cut-to-length subject to order confirmation |
| کاربردها | Roll forming, roofing profiles, construction components and fabrication |
| حداقل سفارش | Confirm for the specific specification and order |
| Lead time | Confirm with the quotation |
| Documents | Mill test certificate and required export documents to confirm |
DX51D+Z galvanized coil can be used in roofing and wall profiles, construction sections, cut-to-length sheet, fabricated steel parts, and HVAC components. The buyer shall match the grade, thickness, forming radius and coating class to the drawing or production line.
Before ordering, provide the final thickness, width, tolerance, forming method and required coating class. Bomis can review whether full-width coil, slit coil or cut-to-length sheet best fits the order. Slitting and cutting availability, minimum quantity and tolerances require confirmation against the production request.
Export packing and loading details are confirmed with the quotation. State the destination port, coil weight, handling limits and moisture-protection requirements so the packing method matches the shipment and receiving process.
It is used for roll forming, roofing profiles, construction components, cut-to-length sheet and general fabrication where a formable galvanized substrate is required.
They are different designation systems. They may be considered for similar uses in some orders, but the governing standard and mechanical requirements must be checked before substitution.
Select the coating class according to the service environment, forming process and corrosion target. Bomis lists Z40–Z275 for its galvanized coil range; the exact class should be stated in the enquiry.
Slitting may be available. Confirm the slit width, tolerance, edge requirement, coil weight and minimum order for the specific enquiry.
Send the grade, standard, thickness, width, zinc coating, surface treatment, quantity, coil weight, destination port and required documents. Add the application or drawing when forming requirements matter.
The MOQ depends on the final grade, dimensions, coating and processing requirement. Confirm it with the order-based quotation rather than assuming a general catalogue quantity.
Mill documentation can be discussed as part of the order. State the required certificate and inspection documents in the enquiry so the quotation covers the correct paperwork.
—
